Snap Top Chain TP-PT  Major Specifications

TP-PT

Features

  • Curved conveyance chain for heavier loads (high allowable chain load).
  • Comb-toothed plates minimize gaps between links.
  • Top plates snap on to a sideflexing roller chain. The top plates can be replaced, if desired.

[ Click to enlarge ]
PDF Outline Drawing

Contact us for details.

CAD data in DXF format

See the table below

Click here for a list of all DXF files )

Major Specifications/Price/Delivery time

Base chain
Material material symbol Max. allowable tension
kN
Allowable speed m/min
With lube No lube
steel None 2.16 100 40
Package
(Click the series for more information. )
Package symbol Color Availability Operating Temperature Range
゚C
Allowable load graphs
Normal None Gray -20~80 Show allowable load graphs
Low Friction/Anti-Wear LFW White ×
Low Friction/Anti-Wear  LFG Green -20~(65)80 Show allowable load graphs
Model No. Width
mm
Number of links
per one unit of chain
Estimated Mass
kg/m
CAD data
in DXF format
Standard Price / link Delivery
TP-PT32-LFG 82.6 80 2.2 DXF
TP-PT44-LFG 114.3 80 2.3 DXF
Low Friction/Anti-Wear LFB Brown ×
Advanced Low friction and Wear Resistant ALF Light blue ×
Low Friction  WR Dark green -20~80 Show allowable load graphs
Model No. Width
mm
Number of links
per one unit of chain
Estimated Mass
kg/m
CAD data
in DXF format
Standard Price / link Delivery
TP-PT32-WR 82.6 80 2.2 DXF
TP-PT44-WR 114.3 80 2.3 DXF
Heat Resistant/High Speed KV150 Black ×
Heat Resistant/High Speed KV180 Black ×
Heat Resistant/High Speed KV250 Black ×
High speed HS Cream ×
Chemical Resistant Y Matte white ×
Electroconductive E Black ×
Impact Resistant DIA Cream ×
Impact Resistant DIY Green ×
Antibacterial/Mold Resistant MWS Cream ×
Metal Detectable MPD Black ×
Metal Detectable MPW Black ×

Notes

1.Availability
  ● : Standard product
  ○:Made-to-order product
  ×:Not available
  ▲:Special configurations may be available. Contact a Tsubaki representative for further information.

2.Operating temperature of ( ) is for wet conditions.

3.Top plate width of 82.6mm is made by trimming a 114.3mm-wide plate.

Applicable sprockets

※ Click the model No. for detailed information. Click to enlarge.

RS60 Sprockets


Type Material Base Model No.
With plain bore steel RS60-1B□T■
Stainless RS60-1B□T-SS
Engineering plastic RS60-1B□T-P
Fit bore steel RS60-1B□TQ-H~
Stainless RS60-1B□T-SS-H~
Lock Sprocket S Type steel RS60-1B□T■-S○○○○●
Lock sprocket N type steel RS60-1B□TQ-N○○○●
Sprockets can be used provided they have at least 20 teeth.スプロケットのタイプ、形状によりハブが干渉する場合があります。ハブ直径を“スプロケットピッチ円直径-38.1mm”以下に加工してください。

Applicable plastic rail

※ Click the model No. for detailed information. Click to enlarge.



Rail material symbol Model No. Thickness
mm
Width
mm
Main unit End Plate
PR type PMW PR520-PMW PRE520-PMW 5 20
M PR520-M PRE520-M 5 20
PR-PH type PLF PR-PH□□□-PLF PR-PH□□□E-PLF 3~5 20~40

The plastic rail has no heat resistance or chemical resistance.
Contact a Tsubaki representative when using in special environments or usage conditions.