Top chain accessories 　Major Specifications

Applicable Chains

TRU, TTKU

Handling

・For both TRU type and TTKU type.
・Grind off the rivets at the end of the two pins of the outer link to be cut, using a hand grinder.
　Take care not to damage the inner links on both sides.
　In the case of a TRU chain, grind off the rivet on the side having no float-preventive tabs.
・Set the link on the tool as shown with the rivet of the pin ground off.
・Tap the double punch with a hammer, and pull out the two ground-off pins of the chain until they are removed from the outer plate.
・This tool is specifically to be used for disconnecting.
・Is Stock.