Power-Lock RE-SS Series
- Stainless steel series with two types of mounting methods to choose.
- ・By installing or removing the snap ring, you can choose two ways of installing either flange or straight.
- ※With self-centering function. No need for the hassle of machining on hubs for guide portions.
- ※For the flange type, there is no hub movement during assembly, but for the straight type, the hub moves slightly toward the front side in the axial direction during assembly.
Please contact Tsubaki representatives for details.
Stainless Steel Package
- ・The main unit is made of highly anticorrosive austenitestainless steel.
- ・Special lubrication coating is applied to the locking bolts, so no additional lubrication is necessary during assembly.
- ・Available from small shaft diameters. Provides more transmission torque than the KE-SS Series.
- Applicable shaft diameter :Φ5~Φ50
- Torque range :5.01~1170N・m
- Applicable tolerance :Shaft :h8 Hub hole :H8
- Applicable surface roughness :Ra1.6
Construction
With snap ring.
Without snap ring.
Single taper
・"Power-Lock" RE Series shaft-hub locking devices are simply constructed of the following four parts: inner and outer rings, a snap ring and locking bolts. Simply tighten these bolts to achieve a completely secure connection.
Handling method
Catalogs ・Instruction Manuals
Model No. examples
PL | 005 | X | 018 | RE | - | SS |
| Shaft diameter |
| Outer Diameter |
| Series |
| Stainless Steel Package |
List of Models
※Click the name for more information.