Plastic modular chain WT2250FT  Major Specifications

Base Model No. :WT2250FT

Features

  • Combination of wide type and narrow type plastic module like bricks enables a wide conveying surface suitable for conveying bulk quantities.
  • Simple construction with four parts allows for easy part replacement and reduced maintenance time.
  • All-plastic construction. Lightweight and easy to handle.

[ Click to enlarge ]
PDF Outline Drawing

Contact us for details.

CAD data in DXF format

See the table below

Click here for a list of all DXF files )

Major Specifications/Price/Delivery time

Chain pitch mmOpen area %
25.43
Package
(Click the series for more information. )
Package symbol Color Availability Allowable load
per 1m width
kN/m
Mass per
1m2
kg/m2
Allowable speed
m/min
Operating Temperature Range
゚C
Pin material Allowable load graphs
With lube No lube
Normal  G Gray 12.8 9.6 50 50 -20~(60)80 Special engineering plastic Show allowable load graphs
Model No. Chain width
X
mm
Number of links
per one unit of chain
Max. allowable tension
kN
Chain
weight
kg/m
DXF data Standard Price / link Delivery
WT2250FT-W85-G 85 40 1.08 0.82 DXF
WT2250FT-W170-G 170 40 2.17 1.63 DXF
WT2250FT-W255-G 255 40 3.26 2.45 DXF
WT2250FT-W340-G 340 40 4.35 3.26 DXF
WT2250FT-W425-G 425 40 5.44 4.08 DXF
WT2250FT-W510-G 510 40 6.52 4.90 DXF
WT2250FT-W595-G 595 40 7.61 5.71 DXF
WT2250FT-W680-G 680 40 8.70 6.53 DXF
WT2250FT-W765-G 765 40 9.79 7.34 DXF
WT2250FT-W850-G 850 40 10.8 8.16 DXF
WT2250FT-W935-G 935 40 11.9 8.98 DXF
WT2250FT-W1020-G 1020 40 13.0 9.79 DXF
WT2250FT-W1105-G 1105 40 14.1 10.61 DXF
WT2250FT-W1190-G 1190 40 15.2 11.42 DXF
WT2250FT-W1275-G 1275 40 16.3 12.24 DXF
WT2250FT-W1360-G 1360 40 17.4 13.06 DXF
WT2250FT-W1445-G 1445 40 18.4 13.87 DXF
WT2250FT-W1530-G 1530 40 19.5 14.69 DXF
WT2250FT-W1615-G 1615 40 20.6 15.50 DXF
WT2250FT-W1700-G 1700 40 21.7 16.32 DXF
High Temperature  HTW White 6.4 6.9 50 50 5~105 Polypropylene Contact us for details.
Model No. Chain width
X
mm
Number of links
per one unit of chain
Max. allowable tension
kN
Chain
weight
kg/m
DXF data Standard Price / link Delivery
WT2250FT-W85-HTW 85 40 0.54 0.59 DXF
WT2250FT-W170-HTW 170 40 1.08 1.17 DXF
WT2250FT-W255-HTW 255 40 1.63 1.76 DXF
WT2250FT-W340-HTW 340 40 2.17 2.35 DXF
WT2250FT-W425-HTW 425 40 2.72 2.93 DXF
WT2250FT-W510-HTW 510 40 3.26 3.52 DXF
WT2250FT-W595-HTW 595 40 3.80 4.11 DXF
WT2250FT-W680-HTW 680 40 4.35 4.69 DXF
WT2250FT-W765-HTW 765 40 4.89 5.28 DXF
WT2250FT-W850-HTW 850 40 5.44 5.87 DXF
WT2250FT-W935-HTW 935 40 5.98 6.45 DXF
WT2250FT-W1020-HTW 1020 40 6.52 7.04 DXF
WT2250FT-W1105-HTW 1105 40 7.07 7.62 DXF
WT2250FT-W1190-HTW 1190 40 7.61 8.21 DXF
WT2250FT-W1275-HTW 1275 40 8.16 8.80 DXF
WT2250FT-W1360-HTW 1360 40 8.70 9.38 DXF
WT2250FT-W1445-HTW 1445 40 9.24 9.97 DXF
WT2250FT-W1530-HTW 1530 40 9.79 10.56 DXF
WT2250FT-W1615-HTW 1615 40 10.3 11.14 DXF
WT2250FT-W1700-HTW 1700 40 10.8 11.73 DXF

Notes
 1.Operating temperature of ( ) is for wet conditions.
 2.Values for max. allowable load are at ambient temperature (20℃) and assume that tension acts uniformly over the entire chain width.
  Also, it differ depending on usage conditions such as operating temperature, speed, etc. See the allowable load graph
 3.Availability
  ○:Made-to-order product
  ×:Not available
  ▲:Special configurations may be available. Contact a Tsubaki representative for further information.
 4.Chain width can be formed from 85mm wide units. Widths greater than the above available upon request.
  Contact a Tsubaki representative for further information.
 5.Chain width X shown is a nominal width. Actual width range is 0~-0.7% at 20℃operating temperature.
  Chain width is subject to expansion or contraction with changes in temperature.
  Expansion/contraction rate is 0.00015/℃ based on reference temper

Applicable sprockets

※ Click the model No. for detailed information. Click to enlarge.





Model No. Number of teeth Pitch diameter
mm
Bore diameter
mm
Type
WT-SW2250-16T30 16 130.20 φ30 Split
WT-SW2250-16T40 φ40
WT-SW2250-16T40S □40
WT-SW2250-18T30 18 146.27 φ30
WT-SW2250-18T40 φ40
WT-SW2250-18T40S □40

Applicable idler sprockets

※ Click the model No. for detailed information. Click to enlarge.



Model No. Number of teeth Pitch circle dia.
mm
Bore diameter
mm
Type
WT-SW2250-16T30IW-M 16 130.20 φ30 Split
WT-SW2250-16T40IW-M φ40
WT-SW2250-18T30IW-M 18 146.27 φ30
WT-SW2250-18T40IW-M φ40

Applicable plastic rail

※ Click the model No. for detailed information. Click to enlarge.



Rail material symbol Model No. Thickness
mm
Width
mm
Main body End Plate
PR type PMW PR520-PMW PRE520-PMW 5 20
M PR520-M PRE520-M 5 20
PR-PH type PLF PR-PH□□□-PLF PR-PH□□□E-PLF 3~5 20~40

The plastic rail has no heat resistance or chemical resistance.
Contact a Tsubaki representative when using in special environments or usage conditions.