Plastic modular chain WT2250FT  Major Specifications

WT2250FT

Features

  • Combination of wide type and narrow type plastic module like bricks enables a wide conveying surface suitable for conveying bulk quantities.
  • Simple construction with four parts allows for easy part replacement and reduced maintenance time.
  • All-plastic construction. Lightweight and easy to handle.

[ Click to enlarge ]
PDF Outline Drawing

Contact us for details.

CAD data in DXF format

See the table below

Click here for a list of all DXF files )

Major Specifications/Price/Delivery time

Chain pitch mm Open area %
25.4 3
Package
(Click the series for more information. )
Package symbol Color Availability Allowable load
per 1m width
kN/m
Mass per
1m2
kg/m2
Allowable speed
m/min
Operating Temperature Range
゚C
Pin material Allowable load graphs
With lube No lube
Normal  G Gray 12.8 9.6 50 50 -20~(60)80 Special engineering plastic Show allowable load graphs
Model No. Chain width
X
mm
Number of links
per one unit of chain
Max. allowable tension
kN
Chain
weight
kg/m
DXF data Standard Price / link Delivery
WT2250FT-W85-G 85 40 1.08 0.82 DXF
WT2250FT-W170-G 170 40 2.17 1.63 DXF
WT2250FT-W255-G 255 40 3.26 2.45 DXF
WT2250FT-W340-G 340 40 4.35 3.26 DXF
WT2250FT-W425-G 425 40 5.44 4.08 DXF
WT2250FT-W510-G 510 40 6.52 4.90 DXF
WT2250FT-W595-G 595 40 7.61 5.71 DXF
WT2250FT-W680-G 680 40 8.70 6.53 DXF
WT2250FT-W765-G 765 40 9.79 7.34 DXF
WT2250FT-W850-G 850 40 10.8 8.16 DXF
WT2250FT-W935-G 935 40 11.9 8.98 DXF
WT2250FT-W1020-G 1020 40 13.0 9.79 DXF
WT2250FT-W1105-G 1105 40 14.1 10.61 DXF
WT2250FT-W1190-G 1190 40 15.2 11.42 DXF
WT2250FT-W1275-G 1275 40 16.3 12.24 DXF
WT2250FT-W1360-G 1360 40 17.4 13.06 DXF
WT2250FT-W1445-G 1445 40 18.4 13.87 DXF
WT2250FT-W1530-G 1530 40 19.5 14.69 DXF
WT2250FT-W1615-G 1615 40 20.6 15.50 DXF
WT2250FT-W1700-G 1700 40 21.7 16.32 DXF
High Temperature  HTW White 6.4 6.9 50 50 5~105 Polypropylene Show allowable load graphs
Model No. Chain width
X
mm
Number of links
per one unit of chain
Max. allowable tension
kN
Chain
weight
kg/m
DXF data Standard Price / link Delivery
WT2250FT-W85-HTW 85 40 0.54 0.59 DXF
WT2250FT-W170-HTW 170 40 1.08 1.17 DXF
WT2250FT-W255-HTW 255 40 1.63 1.76 DXF
WT2250FT-W340-HTW 340 40 2.17 2.35 DXF
WT2250FT-W425-HTW 425 40 2.72 2.93 DXF
WT2250FT-W510-HTW 510 40 3.26 3.52 DXF
WT2250FT-W595-HTW 595 40 3.80 4.11 DXF
WT2250FT-W680-HTW 680 40 4.35 4.69 DXF
WT2250FT-W765-HTW 765 40 4.89 5.28 DXF
WT2250FT-W850-HTW 850 40 5.44 5.87 DXF
WT2250FT-W935-HTW 935 40 5.98 6.45 DXF
WT2250FT-W1020-HTW 1020 40 6.52 7.04 DXF
WT2250FT-W1105-HTW 1105 40 7.07 7.62 DXF
WT2250FT-W1190-HTW 1190 40 7.61 8.21 DXF
WT2250FT-W1275-HTW 1275 40 8.16 8.80 DXF
WT2250FT-W1360-HTW 1360 40 8.70 9.38 DXF
WT2250FT-W1445-HTW 1445 40 9.24 9.97 DXF
WT2250FT-W1530-HTW 1530 40 9.79 10.56 DXF
WT2250FT-W1615-HTW 1615 40 10.3 11.14 DXF
WT2250FT-W1700-HTW 1700 40 10.8 11.73 DXF

Notes
 1.Operating temperature of ( ) is for wet conditions.
 2.Values for max. allowable load are at ambient temperature (20℃) and assume that tension acts uniformly over the entire chain width.
  Also, it differ depending on usage conditions such as operating temperature, speed, etc. See the load graph of chain.
 3.Availability
  ○:Made-to-order product
  ×:Not available
  ▲:Special configurations may be available. Contact a Tsubaki representative for further information.
 4.Chain width can be formed from 85mm wide units. Widths greater than the above available upon request.
  Contact a Tsubaki representative for further information.
 5.Chain width X shown is a nominal width. Actual width range is 0~-0.7% at 20℃operating temperature.
  Chain width is subject to expansion or contraction with changes in temperature.
  Expansion/contraction rate is 0.00015/℃ based on reference temperature of 20℃.

Applicable sprockets

※ Click the model No. for detailed information. Click to enlarge.






Model No. Number of teeth Pitch Diameter
mm
Bore diameter
mm
Type
WT-SW2250-16T■ 16 130.20 Φ30, Φ40, □40 Split
WT-SW2510-18T■ 18 146.27 Φ30, Φ40, □40
×
( Drag to move. )
Model No.Number of teethPitch Diameter
mm
Bore diameter
mm
Type
WT-SW2250-16T30 16 130.20 Φ30 分割形
WT-SW2250-16T40 Φ40
WT-SW2250-16T40S □40
×
( Drag to move. )
Model No.Number of teethPitch Diameter
mm
Bore diameter
mm
Type
WT-SW2510-18T30 18 146.27 Φ30 分割形
WT-SW2510-18T40 Φ40
WT-SW2510-18T40S □40

Applicable idler sprockets

※ Click the model No. for detailed information. Click to enlarge.



Model No. Number of teeth Pitch Diameter
mm
Bore diameter
mm
Type
WT-SW2250-16T■IW-M 16 130.20 Φ30, Φ40 Split
WT-SW2250-18T■IW-M 18 146.27 Φ30, Φ40
×
( Drag to move. )
Model No.Number of teethPitch Diameter
mm
Bore diameter
mm
Type
WT-SW2250-16T30IW-M 16 130.20 Φ30 Split
WT-SW2250-16T40IW-M Φ40
×
( Drag to move. )
Model No.Number of teethPitch Diameter
mm
Bore diameter
mm
Type
WT-SW2250-18T30IW-M 18 146.27 Φ30 Split
WT-SW2250-18T40IW-M Φ40

Applicable plastic rail

※ Click the model No. for detailed information. Click to enlarge.



Rail material symbol Model No. Thickness
mm
Width
mm
Main unit End Plate
PR type PMW PR520-PMW PRE520-PMW 5 20
M PR520-M PRE520-M 5 20
PR-PH type PLF PR-PH□□□-PLF PR-PH□□□E-PLF 3~5 20~40

The plastic rail has no heat resistance or chemical resistance.
Contact a Tsubaki representative when using in special environments or usage conditions.