Double Pitch Chain with top rollers Major Specifications
RF2040S-SS-TR
※ | The CAD data contained herein is made available to you via the CAD drawing library; PARTcommunity is provided by CADENAS WEB2CAD Co. |
※ | Please direct your inquiries regarding the CAD data service or PARTcommunity to: CADENAS WEB2CAD Co. TEL: +81 (3) 5961-5031 FAX: +81 (3) 5961-5032 |
Catalogs ・Instruction Manuals
Major Specifications
Size & Roller type & Specification & Top roller Types |
Max. allowable load kN {kgf} |
Estimated Mass kg/m |
No. of links per unit |
Operating temperature range |
---|---|---|---|---|
RF2040S-SS-TR | 0.69{70} | 1.33 | 120 | -20℃~400℃ |
Notes
1.Connecting links are clip type.
2.When attaching top rollers every even link, the top rollers will be attached to the inner link unless otherwise specified.
3.When using SS Series, 18-8SUS (SUS304 equivalent) will be used if plastic R-rollers are not indicated.
4.SS and LMC Series cannot be joined together.
Principal dimensions mm
Pitch P |
Inner width of inner link W |
Roller dia. R |
Pin | Plate | Top roller | ||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Diameter D | L1 | L2 | Width H | Thickness T | DF | CS | XS | ℓ1 | ℓ2 | d | |||
25.40 | 7.95 | 7.92 | 3.97 | 8.25 | 9.95 | 12.0 | 1.5 | 15.88 | 15.0 | 21.0 | 8.25 | 9.65 | 3.97 |
Price・Delivery
Contact us at the location listed below for the Price and Delivery time
Double strand Double Pitch Chain with top rollers
Chain with more conveying power than with a single strand.
RF2040R | - | 2 | - | 1L | TR |
| Base chain roller types |
| | | |
| | | |
| Top roller |
||
| | |
Top roller attachment spacing | ||||
Double strand chain |
Size & Roller type & No. of strands & Top roller Types |
Pitch P |
Inner width of inner link W |
Lateral pitch C |
Roller dia. R |
Pin | Plate | Top roller | ||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Diameter D | L1 | L2 | Width H | Thickness T | DF | CS | XS | ℓ1 | ℓ2 | d | |||||
RF2040S-2-TR | 25.40 | 7.95 | 14.4 | 7.92 | 3.97 | 15.45 | 17.15 | 12.0 | 1.5 | 15.88 | 15.0 | 21.0 | 15.45 | 17.25 | 3.97 |
Notes
1.Connecting links are clip type.
2.Sizes larger than RF2060-2 have a different C dimension than RS sprockets and require a special sprocket.
3.When the base chain rollers are R-rollers, the sprocket must be made-to-order.
4.When attaching top rollers every even link, the top rollers will be attached to the outer link unless otherwise specified.
5.Contact a Tsubaki representative regarding the maximum allowable load for the base chain.
Contact Information
Online Inquiries
For inquiries in English, visit the Inquiries page on our Tsubaki Group website.