Super-H chain Major Specifications
RS160-SUPH-1
※ | The CAD data contained herein is made available to you via the CAD drawing library; PARTcommunity is provided by CADENAS WEB2CAD Co. |
※ | Please direct your inquiries regarding the CAD data service or PARTcommunity to: CADENAS WEB2CAD Co. TEL: +81 (3) 5961-5031 FAX: +81 (3) 5961-5032 |
Catalogs ・Instruction Manuals
Major Specifications
Size&Package &No. of strands |
No. of strands | Min. tensile strength kN {kgf} |
Avg. tensile strength kN {kgf} |
Max. allowable tension kN {kgf} |
Estimated Mass kg/m |
No. of links per unit |
---|---|---|---|---|---|---|
RS160-SUPH-1 | 1 | 281{28700} | 324{33000} | 90.0{9180} | 11.72 | 60 |
Notes
1.Offset links are not available. Use an even number of links.
2.Made to order
Principal dimensions mm
Pitch P |
Roller dia. R |
Inner link inner width W |
Plate | Pin | ||||
---|---|---|---|---|---|---|---|---|
T1 | H | h | D | L1 | L2 | |||
50.80 | 28.58 | 31.75 | 7.15 | 48.2 | 41.6 | 14.29 | 33.95 | 38.45 |
Applicable connecting link
Type | F-type connecting link |
---|---|
Model No. | RS160-SUPH-1-FSJL |
Standard Price | Contact us for details. |
Delivery | Contact us for details. |
Notes for use
1.「許容張力選定法」によって、チェーンとスプロケットを選定してください。
2.Make sure to use either drip lubrication, oil bath/slinger disc lubrication, or forced pump lubrication.
3.RS Roller Chain sprockets can be used, but do not use cast iron sprockets.
Use S35C or above. For sprockets with fewer teeth, harden the tooth tips.
Also check for the key strength, etc.
4.Consider Tough Tooth sprockets, which are optimal for Heavy Duty Chain.
Contact Information
Online Inquiries
For inquiries in English, visit the Inquiries page on our Tsubaki Group website.