Surface treated drive chain NEP Series Major Specifications
RS60-NEP-2
[Click to enlarge ]
| ※ | The CAD data contained herein is made available to you via the CAD drawing library; PARTcommunity is provided by CADENAS WEB2CAD Co. |
| ※ | Please direct your inquiries regarding the CAD data service or PARTcommunity to: CADENAS WEB2CAD Co. TEL: +81 (3) 5961-5031 FAX: +81 (3) 5961-5032 |
Catalogs ・Instruction Manuals
Major Specifications
| Size&Package &No. of strands |
No. of strands |
Min. tensile strength kN {kgf} |
Max. allowable load kN {kgf} |
Estimated Mass kg/m |
No. of links per unit |
|---|---|---|---|---|---|
| RS60-NEP-2 | 2 | 80.4{8200} | 15.0{1530} | 3.04 | 160 |
Notes
1.When using an offset link (OL), the maximum allowable tension is 65% of the above table.
2.Made to order
Principal dimensions mm
| Pitch P |
Roller dia. R |
Inner link inner width W |
Plate | Pin | Transverse pitch C mm |
|||||
|---|---|---|---|---|---|---|---|---|---|---|
| T | H | h | D | L1 | L2 | L | ||||
| 19.05 | 11.91 | 12.70 | 2.4 | 18.1 | 15.6 | 5.96 | 24.25 | 26.25 | 52.6 | 22.8 |
Applicable connecting link
| Type | Connecting link | Offset link |
|---|---|---|
| Model No. | RS60-NEP-2-MCJL | RS60-NEP-2-OL |
| Standard Price | Contact us for details. | Contact us for details. |
| Delivery | Contact us for details. | Contact us for details. |
Notes for use
Using a steel chain with a stainless steel sprocket can lead to galvanic corrosion under some circumstances, which will cause premature roller wear.
Avoid combining these wherever possible, and consider a steel surface treated sprocket instead.
In
Contact Information
Online Inquiries
For inquiries in English, visit the Inquiries page on our Tsubaki Group website.
