Surface treated Lambda Chain NP Series  Major Specifications

RS60-LMDNP-1


[Click to enlarge ]
PDF Outline Drawing

Contact us for details.

DXF drawings / 3D CAD data

To CADENAS WEB2CAD website.

The CAD data contained herein is made available to you via the CAD drawing library; PARTcommunity is provided by CADENAS WEB2CAD Co.
Please direct your inquiries regarding the CAD data service or PARTcommunity to:
 CADENAS WEB2CAD Co. TEL: +81 (3) 5961-5031 FAX: +81 (3) 5961-5032

Catalogs ・Instruction Manuals

Major Specifications

Size&Package
&No. of strands
No. of strands Min. tensile strength
kN {kgf}
Estimated Mass
kg/m
No. of links
per unit
Allowable speed
m/min
Operating
temperature
range
RS60-LMDNP-1 1 40.2{4100} 1.72 160 120 -10℃~150℃

Notes
 1.Stocked unit


Principal dimensions  mm

Pitch
P
Roller dia.
R
Inner link inner width
W
Plate Pin
T1 T2 H h D L1 L2 L
19.05 11.91 12.28 2.4 3.2 18.1 15.6 5.96 13.70 15.70 32.0

Price・Delivery

Type Unit
Model No. RS60-LMDNP-1-RP-U
Standard Price Contact us for details.
Delivery Contact us for details.

Applicable connecting link

Type Connecting link Offset link
Model No. RS60-LMDNP-1-MCJLRS60-LMDNP-1-OL
Price Contact us for details. Contact us for details.
Delivery Contact us for details. Contact us for details.

Notes for use

 1.Dust may accelerate wear. Wet environments can cause wear due to oil leakage from oil-impregnated bushes.
  Also, less rust-preventing oil is applied than RS Roller Chain, leading to early rust.
 2.Bush oil can leak in a vacuum, resulting in reduced wear life. So do not use in a vacuum.
 3.If the oil-impregnated bushes run out of oil, the wear life will be decreased dramatically.


Nickel plating specifications

Do not use if the chain will come into direct contact with food of if there is a risk of flakes and wear dust mixing in with food.
When using in non-food applications as well, if used in areas where flakes or wear dust will pose problems install an ap


Transmission Capacity Table  kW

Small
sprocket
no. of teeth
Small sprocket RPM  r/min
10 25 50 100 150 200 250 300 400 500 600 700
9 0.18 0.41 0.76 1.41 2.03 2.64 3.22 3.80 4.92 6.01 7.08 8.14
10 0.20 0.45 0.85 1.58 2.28 2.95 3.61 4.25 5.51 6.74 7.94
11 0.22 0.50 0.94 1.75 2.53 3.27 4.00 4.71 6.11 7.47
12 0.24 0.55 1.03 1.93 2.78 3.60 4.40 5.18 6.71 8.20
13 0.26 0.60 1.13 2.10 3.03 3.92 4.79 5.65 7.32
14 0.29 0.65 1.22 2.28 3.28 4.25 5.19 6.12 7.92
15 0.31 0.70 1.31 2.45 3.53 4.58 5.59 6.59 8.54
16 0.33 0.75 1.41 2.63 3.79 4.91 6.00 7.07
17 0.35 0.81 1.50 2.81 4.04 5.24 6.40 7.54
18 0.38 0.86 1.60 2.99 4.30 5.57 6.81 8.02
19 0.40 0.91 1.70 3.16 4.56 5.91 7.22 8.51
20 0.42 0.96 1.79 3.35 4.82 6.24 7.63 8.99
21 0.44 1.01 1.89 3.53 5.08 6.58 8.04 9.48
22 0.47 1.06 1.99 3.71 5.34 6.92 8.46
23 0.49 1.12 2.08 3.89 5.60 7.26 8.87
24 0.51 1.17 2.18 4.07 5.87 7.60 9.29
25 0.54 1.22 2.28 4.26 6.13 7.94 9.71
26 0.56 1.28 2.38 4.44 6.40 8.29
28 0.61 1.38 2.58 4.81 6.93 8.98
30 0.65 1.49 2.78 5.18 7.47 9.67
32 0.70 1.60 2.98 5.56 8.00
35 0.77 1.76 3.28 6.12 8.82
40 0.89 2.03 3.79 7.07 10.2
45 1.01 2.31 4.30 8.03

Notes
 1.kW ratings when using a 1-pitch offset link (OL) are 80% of the above.
 2.The kW rating table is different from that of RS Roller Chain.